How to Lubricate Cherry Mx Switches?
To lubricate Cherry Mx switches, you will need: a can of compressed air, a small paintbrush, isopropyl alcohol, a lint-free cloth, and silicone grease. 1. Use the can of compressed air to blow any dust out of the switch housing. 2. Dip the paintbrush in isopropyl alcohol and use it to clean the surface of the switch contacts.
3. Apply a small amount of silicone grease to the switch contacts with the paintbrush. 4. Use the lint-free cloth to wipe away any excess silicone grease from the housing.
- Get a can of compressed air and spray the switch from the inside to remove any dust that might be present
- Apply a small amount of lubricant to the stem of the switch
- You can use a variety of different lubricants, but silicone grease or oil works well
- Use a toothpick or other small object to spread the lubricant around inside the switch housing
- Work the switches back and forth several times to work the lubricant into all areas of the switch
- Allow the switches to dry for at least 24 hours before using them again
Pre Lubed Switches
Pre-lubed switches are a type of switch that come with a lubricant already applied. This can be helpful in a few ways. First, it can cut down on the amount of time you need to spend lubing your switches.
Second, it can provide a more consistent application of lubricant, which can help improve the feel of your keys. Finally, pre-lubed switches may also be less likely to attract dust and debris than other types of switches.
Should I Lube Cherry Mx Switches?
Cherry MX switches are some of the most popular choices for mechanical keyboards, and they’re often lauded for their smooth, responsive keystrokes. But should you lube them? Here’s what you need to know about lubing your Cherry MX switches.
Lubing your switches can make them smoother and quieter. It can also help prevent dust and other contaminants from building up inside the switch, which can eventually lead to problems. That said, lubing your switches is not a necessary step, and it’s possible to over-lube them, which can cause issues.
So if you’re not sure what you’re doing, it’s best to leave this task to a professional.
How Do You Lubricate Mx Switches?
There are a few ways to lubricate MX switches, but the most common is to use silicone-based lubricant. First, you’ll need to remove the switch from the keyboard. Then, using a cotton swab or other applicator, apply a small amount of lubricant to the stem of the switch.
You can also add a drop of lubricant to each side of the housing, but be sure not to get any on the PCB or other electronic components. Once you’ve applied the lubricant, reassemble the switch and keyboard.
How Do You Lubricate Keyboard Switches?
Assuming you would like tips on how to lubricate your keyboard switches: One way to help make your keyboard quieter and smoother is to lubricate the key switches. You can use a variety of lubricants, but we recommend using silicon grease or silicone oil because they’re effective and easy to find.
Be careful not to use too much lubricant—a small amount is all you need. We also don’t recommend using WD-40 because it can damage the plastic housing on the switch. To apply the lubricant, start by removing the keycaps from your keyboard.
Next, put a small amount of silicon grease or silicone oil on your finger and rub it onto the exposed metal parts of the switch (the part that moves when you press down on a key). Once you’ve applied the lubricant, replace the keycaps and enjoy your newly quiet keys!
Is Vaseline Good for Lubing Switches?
Vaseline is often touted as a good option for lubing switches, but there are some pros and cons to using it. On the plus side, Vaseline is inexpensive and easy to find. It can also help to prevent oxidation of the switch contacts.
However, Vaseline can be messy to work with and it can attract dust and dirt. It can also cause the keycaps to become sticky over time. If you do decide to use Vaseline, make sure to apply it sparingly.
A little goes a long way when lubing switches!
How to Lube MX Style Switches
Conclusion
Cherry Mx switches are some of the most popular and widely used switches in mechanical keyboards. In order to keep them functioning properly, it is important to lubricate them regularly. There are a few different ways to do this, but one of the simplest is to use a silicon-based lubricant.
Start by removing the keycaps from the Cherry Mx switches. Next, apply a small amount of lubricant to the exposed metal parts of the switch. Be sure to avoid getting any on the plastic housing or other parts of the keyboard.
Once you have applied the lubricant, reassemble the keyboard and enjoy your smoother typing experience!